AT
CommandsAT
Commands
short message testing
Send message +CMGS
Command syntax in text mode：
AT+CMGS=<da> [,<toda>] <CR>
text is entered<ctrl-z/ESC>
Command syntax in PDU mode：
AT+CMGS=<length> <CR>
PDU is entered<ctrl-z/ESC>
詳細指令說明請參看AT commands說明書的9.12 Send message +CMGS
Read message +CMGR
Command syntax : AT+CMGR=<index>
Response syntax for text mode:
+CMGR :<stat>,<oa>,[<alpha>,] <scts> [,<tooa>,<fo>,
<pid>,<dcs>,<sca>,<tosca>,<length>]
<CR><LF> <data> (for SMS-DELIVER
+CMGR : <stat>,<da>,[<alpha>,] [,<toda>,<fo>,<pid>,<dcs>,
[<vp>], <sca>,
<tosca>,<length>]<CR><LF> <data> (for SMS-SUBMIT
only)
+CMGR : <stat>,<fo>,<mr>,[<ra>],[<tora>],<scts>,<dt>,<st>
(for SMSSTATUS-
Response syntax for PDU mode :
詳細指令說明請參看AT commands說明書的9.10 Read message +CMGR
signal strength testing
Signal Quality +CSQ
Command syntax：AT+CSQ
詳細指令說明請參看AT commands說明書的6.1 Signal Quality +CSQ
Cell environment description
+CCED
Attach the document of WaveCom for your reference
所回傳的值，其格式如下表可細分為四種類。
|
Type |
The Cell Identity is available |
Standard |
|
Main
Cell |
Yes |
MCC,
MNC, LAC, CI, BSIC, BCCH Freq (absolute), RxLev, RxLev Full, RxLev Sub,
RxQual, RxQual Full, RxQual Sub,Idle TS |
|
Main
Cell |
No |
MCC,
MNC, LAC, , BSIC, BCCH Freq (absolute), RxLev, RxLev Full, RxLev Sub,
RxQual, RxQual Full, RxQual Sub,Idle TS |
|
Neighbour
Cell (1-6) |
Yes |
MCC,
MNC, LAC, CI, BSIC, BCCH Freq (absolute), RxLev |
|
Neighbour
Cell (1-6) |
No |
MCC,
MNC, LAC, , BSIC, BCCH Freq (absolute), RxLev |
Ps:［CI］代表基地台的編號，［Rxlev］代表接收的強度
下為所回傳來的一組數據：
+CCED:466,97,4eee,6596,62,683,19,,,0,,,0,466,97,4eee,5814,62,680,12
,466,97,4eee,,60,701,13,466,97,4eee,,59,706,5,466,97,4eee,6597,56,703,8
其中紅色字體代表：基地台的編號
綠色字體代表：接收的強度
灰色為底代表：Main Cell
以框為底代表：Neighbour Cell
詳細指令說明請參看Specific
AT commands補充說明書的15.1
Cell environment description +CCED
AT commands照片
